NC-150 water-based cleaning agent of metal rust 
 Executive Standard: Q/DGD.023 
 Product Code: GY12 
 NC-150 contains a special rust inhibitor, emulsifier, wetting agent, can be used for cast iron, carbon steel, brass and copper alloy material system of mechanical equipment, parts cleaning agents, this product can produce slight cleaning foam, an efficient, rust-proof, safe, and convenient features. 
 Features: 
 High: NC-150 strong detergency, can quickly clear the metal surface of the oil, on the hidden parts can be cleaned. 
 Safety: This product is corrosive to metal is not harmful to humans, do not pollute the environment. 
 Easy: NC-150 can be used in different cleaning methods, do not rinse after washing directly into the next process. 
 Physical and chemical properties: 
 Appearance light yellow transparent liquid 
 Density of 1.07 ± 0.05 
 PH value of 8.0 ± 0.5 
 Usage: 
 On machinery and equipment, according to the degree of oil will be diluted 5 to 10 times the liquid, spray gun, spray can, spray wash cleaning machines. 
 According to the extent of oil pollution on the workpiece. The stock solution diluted 1 to 5 times, to soak, scrub, scrub. 
 On machinery and equipment, parts washing after, do not rinse with water, dried by natural drying or low temperature, you can directly put into use. 
 Note: 
 Using the product wear rubber gloves, if accidentally splashed into the eyes, immediately wash with water. 
 Long-term placement, use will produce a small amount of foam, before use by adding 10g per 25kg defoamer. 
 Heat cleaning, the temperature should not exceed 50 ℃. 
 If freezing, melting and then you use, does not affect the results. 
 Packaging: 
 25kg / drum, 200 kg / barrel 
 Storage: 
 Stored at room temperature away from light.